Wednesday, 31 July 2013

Demonstration - Specifying construction products using NBS Create

A couple of months ago I did a short software demonstration video for NBS TV showing how NBS Create works as part of the wider-BIM process. We had a number of complimentary comments about this video, so I have done another one.
NBS Plus - now even more powerful in NBS Create
This short video looks at how NBS Create can be used to specify construction products from particular manufacturers. In this example, natural stone blocks from Bradstone, mortar from CPI Mortars Ltd and insulation from Kingspan Insulation Ltd are all specified using NBS Create.

Hopefully it is an informative video for both construction professionals who specify and also manufacturers who would like to be part of the NBS Plus service.

Finally, I'll also take this opportunity to promote our fantastic NBS Training blog that has a growing number of tips and trips for NBS Create usage.

- NBS Create Tips and Tricks

- Specific Tips and Tricks blog post on NBS Plus

Remember to visit the NBS Training blog
Update 01/08/13 - One or two have asked me how the NBS Plus service works...
Taken from our products page...
NBS Plus is a library of manufacturers' product information, linked to specific clauses within the NBS specification software products NBS Create, NBS Building, NBS Landscape, NBS Engineering Services and NBS Scheduler.

It enables manufacturers to have their product information available to specifiers at the point they need it most – when completing a specification.

The links within the specification software allow users to specify products quickly and accurately by a click of a button that then drops the product information directly into a specification.

And a few frequently asked questions from me...

1. The manufacturer XYZ is not in the service, can you add them please?
Please drop us an email at suggesting the manufacturer's name - - the more information you can give us as to the products that are required for specification the better.

2. How much does it cost the manufacturer to be part of NBS Plus?
It is different for every manufacturer depending on how many products they would like in the service. This cost covers the authoring of specification clauses and associated technical guidance from one of our NBS specification consultants and the corresponding production process. The manufacturer can also host this information on their website.

3. How current is the NBS Plus data?
Manufacturers can update their content up to three times per year.

Finally, one statistic from our annual NBS customer satisfaction survey...
"86% of specifiers consider NBS Plus Essential to their business

National Football Museum - Photographs

My little boy is football crazy, we had a trip to last weekend - some pictures below.

Nostalgia and football. Love it.

Playing Subbuteo again after thirty years was fun
Football information from the London Underground in 1922
Medal from the first FA Cup
Signed card by Manchester United players before trip from Belgrade to Munich
Tickets from the route to the 1966 World Cup final
The hand of God shirt - Maradonna got a Steve Hodge England strip in return
Spitting Image puppet of Gazza
Motson's coat
Shirt worn in Newcastle United's 1924 FA Cup winning team
Classic design - Adidas footballs from 1974, 1982 and 1986 World Cups
Robbie Fowler's white suit
Bobby Moore returns from the 1970's World Cup to concentrate on his football
Probably the greatest sideburns of all time
Beckenbauer and Moore in a Terry O'Neil shot
Another O'Neil shot proves footballers fifty years ago weren't that much different to now
Terry O'Neil persuaded Raquel Welch to put on a Chelsea shirt and have a kick about on set

Monday, 15 July 2013

Join the Construction Fantasy Footy League for 2013/2014

Administrated by Pauley Creative, the Construction Fantasy Footy League is a bit of a laugh. It got over twenty participants taking part last year and was eventually won by Matt McCarter from London Underground.

It's easy (and free) to take part...

Step 1 - Sign up at and auto-pick a team for now

Step 2 - enter the Private League Code - 6802-2858

...and a few hours after being announced on Twitter, we already have Patel from Pauley Creative, Champion McCarter from Lond Underground, Austin and Mullin from Autodesk, Jowett from Beca NZ and the pre-season clear favourite, SJH managing the soon-to-be-famous BIM Model United FC.

CN Awards 2013 - Summary

One final summary post about our CN Awards success last week...

1. NBS Create
More info -

NBS Create won the Digital Built Britain Award.

Judges' comment,
"Excellent use of structured asset data in an altruistic business model"
Click the images below for larger, readable images...
Digital Built Britain Award chosen by  HM Government and the Construction Industry Council
Digital Built Britain Award - NBS Create
Host for the night Ben Fogle, Team NBS, HM Government's Dave Philp and CN Awards Rebecca Evans
2. NBS National BIM Library
More info -

NBS National BIM Library won the BIM Initiative of the Year Award.

Judges' comment,
"NBS will become the industry standard location for reliable quality controlled information. NBS has shown real leadership in helping drive UK BIM adoption and consistently makes BIM accessible across the supply chain"
Click the images below for larger, readable images...
BIM Initiative of the Year - NBS National BIM Library
Host for the night Ben Fogle, Team NBS, sponsors Asta and CN Awards Rebecca Evans
...and finally, it was good to see a nice write up in this week's BIM Task Group newsletter...
26th edition of the BIM Task Group newsletter

NBS Create Tips and Tricks

Paul Swaddle NBS
A little blog post for those that want a bit more information on Build Digital Britain Construction News Award winning product NBS Create.

Over the last three or four months Paul Swaddle our NBS Training and Education manager has been putting together some fantastic tutorials on NBS Create on our training blog.

The latest post looks and tips and tricks on how to get the best out of NBS Plus within NBS Create. This is the the sixth blog post in a series of "Top Tips for NBS Create".

In addition to the fantastic free online support, the NBS training team puts on public training events throughout the year and also on-site courses that are tailored to an organisations needs.

Direct links to the Top Tip blog posts are below...
More tips and tricks are uploaded regularly - so please remember to bookmark the link below and also maybe follow Paul on twitter..

Friday, 12 July 2013

Construction News Awards - The Results

Absolutely over the moon that NBS National BIM Library won the BIM Iniative of the Year award and NBS Create won the inaugural HM Government sponsored Build Digital Britain awards at the Construction News event this evening.

A massive, massive well done to all of the departments at NBS who have worked so hard on both of these projects. A big thank you to BIM Academy who have been with us every step of the way with National BIM Library.

Anyway, some pictures and videos from the night...
Double winners
In the program
Picking up the award
...and Richard's interview following the award presentation:

...and (update) - many thanks to all of the kind emails and tweets - a selection of a few of these below...

I remember this now - having Muse played at full volume was a bonus :)

...and some from the NBS gang watching #CNAwards on twitter back in Newcastle...

Wednesday, 10 July 2013

thinkBIM Conference – Operation and Maintenance

Today I chaired the thinkBIM half-day conference looking into BIM with respect to operation and maintenance. The blog post below is a little rough and ready - but just wanted to get it out this evening as I'm out and about for the rest of the week.
thinkBIM at WSP Leeds HQ
The WSP 10 truths about BIM publication
The keynote speakers were Deborah Rowland from UK Cabinet office who spoke from a Government point of view and also Reid Cunningham from BAM FM who gave an angle from the private sector.
Key points from Deborah included…

What a “hard landing” and a “soft landing” looks like

  • GSL (Government Soft Landings) champion for Olympic Veldrome – Sir Chris Hoy. To make sure those that use the building are involved in the design.
  • GSL is mandated along with BIM for 2016
  • Maybe only 20% technology, 80% people and process.
  • Essential, desirable and useful – vital statistics about the use of the building
  • BIM Task Group website – all documentation on GSL at
  • BIM + GSL = The best outcome – need them both together
  • Please take part in the survey:

Super PAM prioritising soft landing requirements
Reid then presented from a private sector practitioner…

  • During a traditional project – the data does not flow through the timeline – from construction to FM and then survey after re-survey during a building’s use. Through BIM we can have a much smoother data transfer.
  • Myth 1 – BIM is only for new facilities – at point of refurb/alteration the building can be surveyed and brought into 3D information environment.
  • Myth 2 – COBie will solve all problems – however the data is out of date as soon as the data is created – and the software is not yet there to pull it into FM systems. But COBie as a principle is a very good principle.
  • Myth 3 – design team can provide all COBie data – however, the sub-contractors on D+B jobs many times specify the product as installed and are in charge of the final COBie data
  • Myth 4 – job is finished at handover “the BIM cliff” – no, the information must be kept up to date and this can ultimately replace O+M manuals
  • Design model to be updated through construction process – then transfer to CAFM system and be kept up to date – this is the dream.
  • Myth 5 – BIM is an IT project – The majority of BIM is in the people and process side and the IT enables us to do this better.
  • “Project Robin” – a BAM project across design, construct and FM. They went from Revit to XML to FM system.
  • Geometrics not necessarily critical to FM – we know where the window is – what about the information.
  • FM information should be accessible on portable devices when standing next to the physical asset in the building.

Design, construction and FM from BAM
Following the keynote addresses the delegates split across five roundtables. These discussion break-outs looked at:

  1. Government Soft Landings with Deborah
  2. BIM for FM with Reid’s colleague from BAM Steve Wheller
  3. BIM for Asset Management with the Amtech Group’s Gary Ross
  4. BIM Legal with Philip Morrison from Shumans
  5. "BIM future gazing" with Martin Brown from Fairsnape

The first session I attended was the BIM for Asset Management session with Gary Ross from Amtech.

  • Imagine the drops as footballs – the data gets lost at every stage – visually how this should be is the football getting bigger then passed back to the start.
  • Two challenges – getting humans involved with expertise early on and also agreeing the rules on data structures.
  • What is important to FM? The design as a whole maybe not so much, but the specification linked with location data and quantities and expected life.
  • The only way to transfer data from what software to another is through agreed open data schemas. This is the only way to transfer data now and to build importers so the tools of the future can read the legacy data.
  • Does the industry have the skills? Will they naturally adapt? Compare a PA from the 1950s using typewriter and post letters compared with one of today using MS Office for meetings, tasks and mail merge. User friendly software is essential and well-structured information.
  • Using FM data from in-use to find out what products work best and feed that information back into future jobs.
NBS Sarah to the left has the gentlemen furiously making notes during the round table session
The second session was a focus group that Paul Wilkinson and Martin Brown were running about new BIM technology ideas.

  • Next generation of BIM thinking
  • Drew Wiggett from NBS, Richard Vertigan 4projects, Kevin Lloyd Balfour Beatty contractor side, Chris Witte Knauf Insulation from manufacturer side
  • The benefits to open well-documented data – allowing smaller players in the global industry to innovate and really work with the data – present at the conference that may fall into this category include kykloud, NBS, 4projects…
  • What about big data? Not yet in the construction industry.
  • How is performance verified? If a manufacturer claims a certain performance in a BIM object… then who verifies this?
  • The biggest challenge is the state of the construction industry – client wanting drawings for planning at lowest fee, then these drawings being used for tender – then being novated to contractor and watching the costs getting squeezed and squeezed and arguments throughout.
  • Has the technology level now gone above everyone’s head? The old guys know their construction stuff, the young ones can produce amazing 3d models – but we cannot afford to have a huge amount of staff on a project.
  • Can information be shared over the cloud between practices?
  • National BIM Library concept is that well-structured information can be made available for free for all of the industry – so that each individual practice does not to have to invest in content creation, protocol development and chasing manufacturers for information. If this is done centrally, a huge amount of money and time can be saved across the industry.
  • Where money is to be made – this is where innovation will happen the fastest. Example quoted was the ability for Facebook to maximise advertising click-throughs through the algorithms around big-data on the cloud.
  • “Open Buildings” and BREEAM project.

The conference being beamed out for free over t'Interweb

Conference appreciation tweets coming from Mexico from BIM Girl
Following the roundtables the next speaker was Carol Hagen from Hagen Business Systems. Carol gave a US perspective on barriers and innovations related to construction digital and web-based applications related to BIM.

Carol discussed…

  • Augmented reality – taking daily site photos and having software that overlays this progress against the BIM used for planning.
  • When are visuals too visual?  - If all you need is the paint spec, do you need it modelled. You want the information you need and not having obstacles put in your way.
  • Interestingly Carol then introduced the BlueBeam product – this is one I blogged about a month or so ago… it’s a tidy project that integrates with BIM design tools and helps generate PDFs with embedded BIM data – RFI or AIs in particular would be improved with this technology
  • 4 out of 60 delegates raised their hand to indicate they were using this product.

Carol presents from Arizona via web linkup
…and to finish off the day we had five short-sharp-20-slide-20-seconds. The brave presenters were:

  • Graham Kelly from BIM Academy. Gave an overview of the 48 hours BIM challenges that they have worked on, Qatar, Singapore and Walker… a nice focus on some of the software development advances around COBie and IFC.
  • Jacqueline Walpole from FSI (FM Solutions) Ltd. Talked about it so important to pull information from BIM platforms into FM systems. Working with Deborah at the Cabinet Office and big contractors like BAM is really exciting at the moment. Great FM tools already map data from HR and SAP systems – we can do this with BIM too as long as designs and contractors let us know the data format.
  • Ed Bartlett from kykloud. Ed looked at how almost as much money is spent on repair and maintenance in the UK as in construction. This is why we need to take FM seriously. Where we are today is 2D documents getting rekeyed into FM systems. We need the IFC and COBie data to suck into FM systems – and this needs to be linked to costs and spec and manuals. Then Ed showed real life examples of it in action – not “can this happen?” but “this is happening”. “FM keeps BIM data alive”.
  • James Austin from Autodesk – James looked at the social media, technology and big data trends. Is Minority Report technology now becoming a reality. When does something become intrusive?
  • Rob Jackson from Bond Bryan – Rob reflected back on BIMShowLive looking at the conference with lots of great pictures. A little bit off me from my blog.
  • Duncan Reed + Matt Owen from 4projects. Matt showed off the 4BIM innovations that shows the BIM via open standards IFC through a web browser. Then how this technology would be used for ThinkBIM members who will be able to logon to 4projects to see example models and data and training materials on BIM.

Always worth the wait - the Pecha Kucha's
Running slightly over time, it was then to nip out to the thinkBIM BBQ (sponsored by 4projects) for a quick drink and a burger before heading off home.